Milestones:Commercialization and Industrialization of Photovoltaic Cells, 1959
Commercialization and Industrialization of Photovoltaic Cells, 1959-83
Sharp Corporation pioneered the development and commercialization of photovoltaic (PV) cells for applications ranging from satellites to lighthouses to residential uses. From the beginning of research into monocrystal PV-cells in 1959, to the mass production of amorphous PV-cells in 1983, this work contributed greatly toward the industrialization of photovoltaic technologies and toward the mitigation of global warming.
Location(s) of Milestone plaque(s)
(i) Solar System Group, SHARP Corporation 282-1 Hajikami, Katsuragi-shi, Nara, 639-2198 Japan
Phone: +81-745-65-1161, GPS: N 34.47574, E 135.741507
(ii) Corporate Research and Development Group, SHARP Corporation 2613-1 Ichinomoto-cho, Tenri-shi, Nara, 632-8567 Japan
Phone: +81-743-65-1321, GPS: N 34.620162, E 135.843096
(iii) Head Office, SHARP Corporation 22-22 Nagaike-cho, Abeno-ku, Osaka, 545-8522 Japan
Phone: +81-6-6621-1221, GPS: N34.621643, E 135.517143
<pIn 1954 three researchers at Bell Laboratories published the results of their discovery of the world’s first practical ‘photovoltaic’ (henceforth abbreviated by ‘PV’) cell which was capable of converting sunlight into electricity, first at 4% and later at 6% conversion-efficiency. In 1959 Sharp Corporation began R&D of silicon monocrystal PV-cells, with mass production starting in 1963, and commercialized a variety of mono/multi-crystalline PV-cells for everything from satellites to lighthouses, and industrial applications to residential use. The annual production capacity has since grown to 500 MW with plans to double it to over 1GW by constructing additionally a new big plant in Sakai City in Osaka Prefecture with the start of operations in fiscal 2009, and moreover the cumulative production volume reached to 2GW at the end of 2007 for the first time in the world. It is estimated that the current world’s cumulative production volume is 8GW, meaning that Sharp has produced a full one-quarter of that.
Sharp’s pioneering works of developing and commercializing PV-cells have been achieved mainly in the fields of consumer electronics, public facilities, space satellites, and industrial and residential applications. Especially, untiring efforts of the project teams devoted to the development and implementation of PV-technologies during the long period, ranging from the start of R&D of monocrystal PV-cells in 1959 to the mass production of amorphous PV-cells in 1983, constructed the firm foundation for the industrialization of PV technologies, as described in what follows.
Since Sharp had been traditionally strong at consumer products, the commercialization of PV-cells was initiated in the field of consumer electronics as follows.
World’s First Transistor Radio
In 1961 Sharp succeeded in developing a prototype PV-cell, which was installed in the world’s first transistor radio BX-381 operating on both PV-cell and battery.
In 1963 a project team headed by Dr. Kozabro Baba succeeded in mass production of PV-module S-224 which realized cell conversion-efficiency of 8.8%, with much smaller surface area than the conventional one. Using an improved version of this module S-224, Seiko developed the first PVinstalled table clock in 1966.
The World’s First PV-Installed Calculator and Watch
In 1976 Sharp developed a more efficient monocrystal silicon PV-module S-225, with cell conversion-efficiency of 10.0%, and installed the cell element of S-255 in calculator EL-8026, Seiko’s watch ‘Quarts’(see Fig. 3), and Citizen’s watch ‘Solar Cell’ for the fist time in the world. In addition, these modules S-224 and S-225 were also applied as power sources for consumer products, such as
(i) transceivers for Mt. Yalung-Kang (at a height of 8,505m in the Himalayas) Mountaineeing Party of Kyoto University in 1973,
(ii) photometers and electronic shutters of cameras,
(iii) spinning trouble detectors, and
(iv) machinery for safety aid, etc.
PV-installed Calculator Business
Sharp developed a new ‘ultra violet’ PV-cell on the basis of the cell of S-225 in 1979, which acted on fluorescent light with much reduced surface area. This PV-cell contributed to the commercialization of a series of wallet type PV-installed calculators, such as EL-826, EL-835, EL-838SE, EL-858, EL-867, EL-325, EL-350, EL-355, EL-515, etc., in the early 1980s. Thus, Sharp paved the way for a new business field by introducing wallet type PV-installed calculators.
Amorphous PV-cells by Roll-to-Roll Process
By introducing the roll-to-roll double-layer manufacturing process, as shown in Fig. 4, from Sharp-ECD (Energy Conversion Devices) Solar Co., Ltd., established in June 1982 as a joint venture of Sharp and ECD Inc. (USA), Sharp began to produce amorphous PV-cells in 1983, which were installed in different consumer products, such as ‘card-calculators’, watches, etc. The annual production capacity of amorphous PV-cells soon grew to 1.5MW, which induced the commercialization of a sequence of cardcalculators EL-865, EL-875, EL-878, EL-900, etc. It should be added that the mass production of amorphous silicon PV-cells also enabled Sharp to supply thin and ‘printable’ card-calculators to other companies, which yielded a big boom of designed cardcalculators in the mid and late 1980s.
In the early 1960s NEC Corporation was the leading manufacturer in the area of PV-cells in Japan. In fact, as of 1961 NEC’s PV-cells had been installed in all of 6 wireless relay stations and 8 lighthouses in Japan. Thus Sharp made every effort to catch up technological skills of developing high efficiency PVcells. In 1963 a project team headed by Dr. Baba succeeded in developing PV-module S-224 which realized cell conversion-efficiency of 8.8% with much smaller surface area than the conventional one, and moreover satisfied the durability test of the Japan Coast Guard. Hence, the Japan Coast Guard adopted Sharp’s PV-arrays composed of this module as power sources for No.1 Tsurumi Light-Buoy of Fig. 5 in Yokohama Port in 1963 as well as for Ogami-Jima Lighthouse in Nagasaki Prefecture in 1966. Following these successful PV installations of the Japan Coast Guard, other government agencies and public corporations began to employ Sharp’s PV-cells for different public facilities. Meanwhile, NEC changed the corporate policy to focus its R&D target principally on computer and communication, withdrawing from the R&D of PV-cells. Thus Sharp had attained by the mid 1970s the position as the Japan’s leading manufacturer of PV-cells. According to remarkable progress of cell conversion-efficiency as shown in Fig. 7, Sharp’s PV-cells have since been used exclusively for lighthouses/light-buoys, traffic/road management, river/dam control, meteorological observations, aviation safety control, broadcast/wireless relay stations, etc. In what follows, the main focus is on Sharp’s PV-cells used dedicatedly for such public facilities.
Light-Buoys and Wireless Relay Stations
In 1963 PV-module S-224 satisfied the durability test of the Japan Coast Guard, and was installed in the No.1 Tsurumi Light-Buoy of Fig.5 in Yokohama Port. Although at that time Sharp had already provided PVcells for 13 lighthouses and 21 light-buoys, this was the world’s first light-buoy floating on the sea. Subsequently, the same type of PV-arrays were installed in a variety of public facilities, such as (i) light-buoys, not only in Japan but also in Malacca Straits, (ii) wireless relay stations in Australia, Philippines, Africa, etc., and (iii) agricultural spray pumps in Indonesia, etc.[7,14].
Lighthouses and Radio/TV Relay Stations
In 1966 the Japan Coast Guard installed Sharp’s 225W PV-array constructed of module S-224, the world’s largest array at that time[3,15], in the Ogami-Jima Lighthouse, which was replaced by another array composed of new module S-225 in 1976.
These modules S-224 and S-225 continued to be installed widely in public facilities[12,16], such as (i) lighthouses throughout Japan; i.e. 159W Tsushima-Kuroshima Lighthouse, 590W Kousaki Lighthouse, 546W Shimotsu-Okinoshima Lighthouse, 576W Eboshi Lighthouse, 660W Koshiki-Jima Lighthouse, 590.4W Tsushima Lighthouse, etc., constructed in the late 1960s through the 1970s, (ii) NHK’s radio/TV-broadcasting relay stations (see Fig. 9) in Wakayama, Hiroshima, Hyogo, and Yamanashi Prefectures, (iii) unmanned lighthouses in Malacca Straits (see Fig. 10), etc., and (iv) unmanned signals on a South Africa railroad (see Fig. 11), etc.
Sharp has since provided PV-arrays for more than 10,000 public facilities, including 8,000 wireless/broadcasting relay stations and telemeters, and 1,900 lighthouses/buoys, among which the Ogami-Jima Lighthouse and the Kousaki Lighthouse, both in Nagasaki Prefecture, had 225W and 590W PV-arrays, the world’s largest as of 1966 and 1974, respectively. Especially, it should be added that through Sharp’s long-term installation of PV-arrays in lighthouses, the Japan’s last resident lighthouse, the Meshima Lighthouse in Nagasaki Prefecture, became unmanned on November 12, 2006.
Public Facilities for Road Management, Meteorological & River/Dam Observation, and Aeronautical Safety
Following PV installations by the Japan Coast Guard, other government offices/agencies and public corporations, such as the Civil Aviation Bureau, the Japan Highway Public Corp., the Japan Meteorological Agency, NHK, electric power companies, etc., employed Sharp’s PV-cells for a wide range of public facilities, such as:
(a) aeronautical safety, (b) road & navigation management, (c) meteorological and river/dam observation, and (d) agricultural and environment use, etc.
In addition, Sharp by itself commercialized PV-installed consumer products, such as road lamps, road signs, road information boards, delineators, raised markers, curb markers, beacon lights, lighting systems, battery chargers for farming and grazing, etc. Specifically, in 1981 modules of S-270A series, i.e. S-270A, S-271A, S-272A, and S-274A, were developed, in which 36 pieces of elements, each with 4 inch diameter, were processed to mold form, as shown in Fig. 12. These PV-modules were very light in weight, and could be installed in elevated places without difficulties. Moreover, they had high reliability even under severe ambient conditions encountered in mountains, deserts, and frigid areas. Thus, modules of S-270A series were installed in a variety of public facilities as follows: (i) Aeronautical Safety: PV-installed systems for aviation safety control, aircraft warning light, beacon light, aeronautical ground light, airway beacon, aeronautical radio, etc., (ii) Road & Navigation Management: PV-installed systems for road lighting, road sign, road information board, delineator, raised marker, curb marker, highway emergency phone, railroad crossing signal, etc. (iii) Meteorological and River Observation: PV-installed telemeters for rainfall and snowfall observation, water-level control of river and dam, etc., and (iv) Agricultural and Environmental Use: PV-installed water-pumping systems for irrigation and drainage, PV-installed electric fencing systems for stock farming, PV-installed solar green housing systems, etc.
In 1967 another project team headed by Mr. Akio Suzuki began to develop PV-cells dedicatedly for installation in space satellites, and made untiring efforts to construct the manufacturing facilities to satisfy the prescribed tests of NASDA (National Space Development Agency of Japan) concerning (i) withstanding radiation environment, (ii) heat cycle, and (iii) high-temperature and high-humidity storage. Consequently, in 1972 NASDA authorized Sharp as the Japan’s first official manufacturer to supply PVcells, and even after NASDA and ISAS (Institute of Space and Astronautical Science of Japan) were unified into JAXA (Japan Aerospace Exploration Agency), JAXA has still authorized Sharp as the sole manufacturer of the PV-cells of satellite use. Sharp has since manufactured PV-cells monopolistically for 50 Japanese satellites, and has also provided PV-cells for 110 foreign satellites. In what follows, PV-cells produced by the end of 1983 dedicatedly for satellite use were outlined.
In 1967 the project team began to set up the manufacturing process for radiation proof silicon PV-cells of satellite use, until in 1972 Sharp’s PV-cells were authorized as official parts of NASDA’s satellites. In 1974 Sharp manufactured PV-cells mounted on the first and second ISS (Ionosphere Sounding Satellites) ever made for practical use in Japan, named ‘Ume No.1’ and ‘Ume No.2’, which were successfully launched in February 1976 and in February 1978, respectively.
Development of Assembly Lines
On commission from NASDA, Sharp devised PV-cells covered with special glass stabilized by cerium micro-sheet in 1975, on the basis of which the development of PV-arrays of satellite use started in 1979, and the BLACK, BSFR (Back Surface Field Reflector), and BSR (Back Surface Reflector) PVcells were also developed in 1980 and authorized as official parts of common use for satellites in 1981. Moreover, by subcontract of NASDA, Sharp developed the paddle- and cylinder-type PV-array assembly lines in 1981 and 1982, respectively, and then the lightweight paddle-type assembly line in 1983.
PV-Cells of Satellite Use
Following the Japan’s first and second working satellites ISS ‘Ume No.1’ and ‘Ume No.2’, Sharp manufactured PV-cells for the following 15 satellites in succession by the end of 1983;
- EXOS-A ‘Kyokko’ in 1975, which was launched in January 1978,
- ECS ‘Ayame’ in 1976, which was launched in February 1979,
- EXOS-B ‘Jikiken’ in 1977, which was launched in September 1982,
- CORSA-B ‘Hakucho’ in 1977 , which was launched in February 1979,
- ETS-Ⅲ‘Kiku N0.3’ in 1978, which was launched in September 1982,
- ETS-Ⅳ‘Kiku No.4’ in 1978, which was launched in February 1981,
- GMS- Ⅱ ‘Himawari No.2’ in 1978, which was launched in August 1981,
- TTS ‘Tansei No.4’ in 1979, which was launched in February 1980
- ASTRO-B ‘Temma’ in 1981, which was launched in February 1983,
- MOS-1 in 1981, which was launched in February 1987,
- EXOS-C ‘Oozora’ in 1982, which was launched in February 1984,
- MS-T5 ‘Sakigake’ in 1982, which was launched in January 1985,
- PLANET-A ‘Suisei’ in 1982, which was launched in August 1985,
- MOS-1‘Momo’ in 1982, which was launched in February 1987,
- GMS-3 ‘Himawari No.3’ in 1983, which was launched in August 1984.
Residential and Industrial Applications
Due to the oil crisis of 1973, Japan’s R&D program ‘Sunshine Project’ commenced in 1974, aiming at reducing manufacturing costs of PV-cells to enhance the spread of residential and industrial PV systems. Sharp participated in this national Project as a PV manufacturer, through which a sequence of highefficiency PV-modules S-225 (cell conversion-efficiency of 10.0%), S-260 (ibid. 12.2%), S-270A (ibid. 12.6%), and S-290 (ibid. 13.0%) were commercialized in 1976 through 1981. In 1980 NEDO (New Energy and Industrial Technology Development Organization), an independent government agency of Japan, was established to enhance the developmengt of technologies for using renewable power sources (solar, wind, biomass). In 1981 Sharp’s PV-module S-290 satisfying the NEDO specification was employed for official PV-installations on roofs of residential and complex houses as well as in distributed and centralized power stations. Sharp has since commercialized various kinds of high-efficiency PV-modules for power generation systems, including monocrystal silicon PV-module NRS-LBSF developed in 1992, which achieved the cell conversion-efficiency of 22.0%, the world’s highest of PV-cells of mass production at that time.
In what follows, residential and industrial applications of Sharp’s PV-cells are outlined.
Design of PV-Installed Power System
There were a variety of PV-installed power systems for residential and industrial applications, for each of which a storage battery was needed. In the design of such a power system, it was necessary to calculate the capacities of the installed PV-cells and the storage battery according to the load’s average power consumption and voltage. The calculation had to be based on the annual sunshine hours and the level of irradiation. Thus Sharp investigated annual data of sunshine hours and levels of irradiation at a number of places inside and outside Japan. Using these meteorological data, Sharp devised a procedure for calculating the PV-cells’ power generation capacity at a scheduled installation site. On the other hand, in order to maintain uninterrupted power supply, optimal design of the storage battery capacity is also mandatory, for which Sharp also provided a calculation procedure. Thus, given a PV-installation site, Sharp could provide the user with the necessary calculation tool of setting up an optimal PV-installed system with the use of these procedures.
Residential and Industrial Applications
In the mid 1970s the PV applications were still limited to use in mountainous areas, deserts, and isolated areas, due to the high cost of commercial electricity in these areas. However, in the late 1970s the PV-cells began to be used increasingly for residential and industrial equipments (for example, see Fig. 16), according as not only production costs of PV-cells decreased, but also their conversion-efficiency grew drastically.
In the early 1980s Sharp’s PV-modules were adopted for residential and industrial applications in a variety of ways, from small power systems, such as:
- household equipments, such as TVs, fluorescent lamp, refrigerator, pump, etc.,
- small clinic systems, such as medical lighting system, refrigerator to store medicine and serum, communication system to contact other clinics, etc.,
- indoor lighting systems, such as outdoor/indoor lighting for home/office use, outdoor sign, tower light, etc.,
to large power systems, such as:
- building-integrated PV systems (see Fig. 17)
- wireless/microwave/broadcasting relay stations,
- multiple unit housing power stations,
- distributed and centralized remote power plants,
- land transportation control, such as barrier flash, electrically controlled variable sign, emergency telephone, guide sign, warning sign, etc.,
- water pumping system for irrigation (see Fig. 18), greenhouse, livestock, etc.
All of these Sharp’s PV-installed power systems operated on modules NT-101/102 and S-271A/272A/274A series, which incorporated efficient and economic silicon wafers (100mm in diameter), and could withstand severe weather conditions on the sea or in mountain, desert, and isolated areas. At that time, a typical example of small PV-installed power system was the one composed of:
- 2 NT-102 modules,
- a lead acid automobile battery (12V,100AH),
- a controller, a TV set (12V,18W), and two fluorescent lamps (12V, 20W);
while a typical example of large PV-installed power system was the one composed of:
- 30 NT-101 modules,
- a Pb-Ca battery (120V, 700AH),
- a controller (overload protection),
- an inverter (transistor type 2kW capacity),
- a TV set (18”,71W), a refrigerator (31kWh/W), 8 fluorescent lamps, a washing machine, a toaster (500W), a water pump (depth 7m, capacity 2m3/day), and a coffee pot (500W).
Sharp’s pioneering works of commercializing and developing PVcells have been achieved in the fields of consumer electronics, public facilities, space satellites, and residential and industrial applications. Distinctive features of these achievements are listed in what follows:
PV-Installed Calculator Business
As a pioneer who had commercialized numbers of calculators, Sharp paved the way for a new phase of calculator business by installing PV-cells in calculators. Specifically, Sharp released the world’s first PV-installed calculator EL-8026 in 1976 using PV-cell S-225, Following this calculator, Sharp developed ‘ultra violet’ PV-cell acting on fluorescent light with much reduced surface area, which yielded a series of wallet type PV-installed calculators EL-826, EL-835, EL-838SE, and so forth, in the early 1980s, and hence Sharp opened up a new business of wallet type PV-installed calculators. Furthermore, by adopting the roll-to-roll process technology from ECD Inc. (USA), Sharp initiated mass production of amorphous PVcells in 1983, which made it possible to commercialize a new type of PV-installed ‘card-calculators’ with thickness of 1.6mm, which created a new worldwide boom of card-calculators,
PV-Installation in Lighthouses
The project team headed by Dr. K. Baba succeeded in developing PV-module S-224 in 1963, which realized higher conversion-efficiency with much smaller surface area than the conventional one. Thus the Japan Coast Guard has since installed Sharp’s PV-arrays in more than 1,900 lighthouses/buoys. Especially, Sharp provided 225W and 590W PV-arrays for the Ogami-Jima Lighthouse and the Kousaki Lighthouse, both in Nagasaki Prefecture, in 1966 and 1974, respectively, each the world’s largest at that time. Moreover, Japan’s last manned lighthouse, the Meshima Lighhouse in Nagasaki Prefecture, went unmanned as it was equipped with Sharp’s PV-arrays.
Space Satellites Authorized by NASDA
Owing to untiring efforts of the project team headed by Mr. A. Suzuki, Sharp’s manufacturing facilities passed NASDA’s tests of (i) withstanding radiation environment, (ii) heat cycle, and (iii) hightemperature high-humidity storage, until in 1972 Sharp’s PV-cells were authorized to be used for NASDA’s satellites,Sharp has since manufactured monopolistically PV-arrays for all 50 Japanese satellites, and has also provided them for 110 foreign ones.
It should be stressed here that on commission from NASDA, Sharp devised specific PV-cells covered with special glass stabilized by cerium micro-sheet as well as BLACK, BSFR, and BSR types of PV-cells dedicatedly for satellite use in the late 1970s. Moreover, by subcontract of NASDA, Sharp developed the paddle- and cylinder-type assembly methods of PV-arrays in 1981 and 1982. Thus Sharp’s PV-technologies contributed greatly to the progress of space engineering both nationally and internationally.
Following the Japan Coast Guard, other government offices/agencies and public corporations, such as the Civil Aviation Bureau, the Japan Highway Public Corp., the Japan Meteorological Agency, NHK, electric power companies, etc., began to adopt Sharp’s PV-arrays composed of modules of S-224, S-225, S-260, and S-270A for facilities of aeronautical safety, telemeters of measuring rainfall/snowfall and water level of river/lake, and wireless/broadcasting relay stations, etc., according to growing efficiency and reliability of PV-cells. Sharp has since provided PV-arrays as the leading manufacturer for more than 8,000 facilities of aeronautical safety, telemeters, and wireless/broadcasting relay stations inside and outside Japan.
Effects of Sunshine/NEDO Project
In 1974 Sharp participated in Japanese national R&D program ‘Sunshine Project’ as a PV-manufacturer, which made it possible to commercialize a sequence of high-power PV-modules S-225, S-260, S-270A, until PV-module S-290 (cell conversion-efficiency; 13.0%) satisfying the NEDO’s specification was attained in 1981, which was employed for the Project’s official PV-installation on roofs of residential and complex houses (see Fig. 16) as well as in distributed/centralized power stations. Moreover, based on these R&D achievements derived in ‘Sunshine Project’, Sharp commercialized a variety of high-power PV-modules, including monocrystal silicon PV-module NRS-LBSF developed in 1992, which realized cell conversion-efficiency of 22.0%, the world’s highest of all PV-cells of mass production at that time.
In conclusion, untiring efforts of Sharp’s project teams devoted to the development and implementation of PV-technologies during the long period, ranging from the start of R&D of monocrystal PV-cells in 1959 to the mass production of amorphous PV-cells in 1983, constructed the firm foundation for the industrialization of PV technologies.
Reference (Attachments 3), Reference (Attachment 4), Reference, and Reference (Attachment 6) were written in Japanese, for which English summaries are added in this Appendix.
1. Reference (Attachment 3):
- Electronic Parts Division, Sharp Corp.(ed.): Summary of Sharp’s Solar Cells, 1991 (in Japanese). This booklet consists of the following contents:
- History of PV-cells
- History of Sharp’s PV-cells
- Summary of Sharp’s PV-cells
- 1 Preface
- 2 Summary and present status of PV-cells
- (1) What is a PV-cell
- (2) Materials of PV-cells
- (3) Producing process of Silicon PV-cells
- (4) Structure and fundamental characteristics of PV-cells
- 3 Trend of the enhancement of efficiency of PV-cells
- (1) PV-cells for satellites
- (2) Terrestrial PV-cells
- 4 Applications of PV-cells
- (1) PV-cells for satellites
- (2) Systems at large of terrestrial PV-cells
- (3) PV-systems for road management
- (4) PV-systems for events
- (5) PV-cells for consumer products
- 5 Conclusion
Each Section outlines the process adopted by Sharp for R&D on PV-technologies, typical examples of developed products with photos, and their features of specifications and performances.
2. Reference  (Attachment 4):
- K.Kimura and A.Negoro: “Solar cell for light buoy, first applied in the world”, Sharp Technical Journal, pp. 88-91, vol. 2, no. 2, 1963 (in Japanese).
This paper briefed the results of the joint R&D with the Japan Coast Guard. As a result of one and half years’ field tests on the sea jointly with the Department of Lighthouse, the Japan Coast Guard, using Sharp’s PV-module S-224, all of the quality, reliability, and efficiency of PVmodule S-224 were proven. Hence the Japan Coast Guard decided to adopt Sharp’s PV-array composed of module S-224, which was successfully installed in the No. 1 Tsurumi Light-Buoy in Yokohama Port on May 24, 1963. Although PV-cells had been installed so far in 13 lighthouses and 21 light-buoys, the No. 1 Tsunami Light-Buoy was the world’s first one floating on the sea.
3. Reference :
- H.Watanabe: “Development story of PV systems”, ibid., no. 98, pp. 4-12, Nov. 2008 (in Japanese). See http://www.sharp.co.jp/corporate/rd/33/pdf/98_p4.pdf
This article outlined Sharp’s 50 years’ story of developing PV systems.
- 1 Birth of PV-cells: Discovery of fundamental principle of PV-cell in 1839; discovery of the world’s first practical PV-cell in 1953 and 1954 by C.S.Fuller, G.Person, and D.M.Chappin at Bell Lab; story of the 3rd World Congress of PV-cell (WCPEC 3).
- 2 Challenging of Sharp: Story of developing PV-modules of S-224 and S-225; Formula of setting up a PV-system at a place on the basis of its sunshine data and meteorological data.
- 3 Era of calculator and watch: Story of commercializing PV-installed consumer products, such as clock, watch, calculator, camera, etc.
- 4 Start of Sunshine Project: Story of Sharp’s activities in the national program of ‘Sunshine Project’.
- 5 Era of developing technologies: Transition of cell conversion-efficiency of Sharp’s PV-cells; Solar Car Race WSC in Australia in 1987: 150W PV power systems set up in Thailand, The world’s first power system for fish farming.
- 6 Residential system (1): NEDO’s projects of PV-installed residential houses; 1MW centralized power station in Saijo City.
- 7 Residential system (2): Granted project of PV-power generating system for residential use
- 8 Conclusion: New business of PV-power generation
4. Reference  (Attachment 6):
- A.Suzuki; “History of Sharp’s PV-cells”, private communication, March 17, 2005.
This article consists of a detailed chronological table of Sharp’s year-on-year historic data of PV products and technologies developed for terrestrial and space PV-cells. These precious data were collected by Mr. A. Suzuki, the project leader of developing PV-cells for satellite use.
<googlemap controls="small" height="250" width="300" zoom="10" lon="135.741507" lat="34.47574" version="0.9"> 34.47574, 135.741507, Commercialization and Industrialization of Photovoltaic Cells, 1959 SHARP Corporation, Katsuragi-shi, Nara, Japan </googlemap>
- 1 Commercialization and Industrialization of Photovoltaic Cells, 1959-83
- 2 Location(s) of Milestone plaque(s)
- 3 Consumer Electronics
- 4 Public Facilities
- 5 Space Satellites
- 6 Residential and Industrial Applications
- 7 Public Facilities
- 8 Effects of Sunshine/NEDO Project
- 9 Appendix