World's First Microprocessor in the F-14A "Tom Cat" Made on Long Island

From ETHW
Revision as of 17:47, 3 May 2013 by Beichner (talk | contribs)

World's First Microprocessor in the F-14A "Tom Cat" made on Long Island

The worlds first MOS-LSI microprocessor chip set ws designed starting June 1968 and completed by June 1970. This highly integrated computer chip set was designed for the US Navy F14A “TomCat” fighter jet by Mr. Steve Geller and Mr. Ray Holt while working for Garrett AiResearch Corp under contract from Grumman Aircraft, the prime contractor for the US Navy. The MOS-LSI chips were manufactured by American Microsystems, Inc of Santa Clara, California.

The MOS-LSI chip set was part of the Central Air Data Computer (CADC) which had the function of controlling the moving surfaces of the aircraft and the displaying of pilot information. The CADC received input from five sources, 1) static pressure sensor, dynamic pressure sensor, analog pilot information, temperature probe, and digital switch pilot input. The output of the CADC controlled the moving surfaces of the aircraft. These were the wings, maneuver flaps, and the glove vane controls. The CADC also controlled four cockpit displays for, Mach Speed, Altitude, Air Speed, and Vertical Speed. The CADC was a redundant system with real-time self-testing built-in. Any single failure from one system would switch over to the other. Two state-of-the-art quartz sensors, a 20-bit high precision analog-to-digital converter, a 20-bit high precision digital-to-analog converter, the MOS-LSI chip set, and a very efficient power unit made up the complete CADC. A team of over 25 managers, engineers, programmers, and technicians from AiResearch and American Microsystems labored for three years to accomplish a design feat never before attempted, a complete state-of-the-art, highly integrated, digital air data computer. Previous designs were based around mechanical technology, consisting of precision gears and cams.

In 1971, Mr. Ray Holt wrote a design paper on the MOS-LSI chip set design which was approved for publication by Computer Design magazine. However, because of national security reasons the U.S. Navy would not approve this paper for publication. Mr. Holt attempted again in 1985 to have the paper cleared and the answer again was no. Finally, in April 1997, he started the process again and this time was able to receive clearance for publication as of April 21, 1998.

The entire contents of this original 1971 paper, "Architecture Of A Microprocessor", is made available here. The first public announcement of the F14A MOS-LSI microprocessor chip set was a published article by the Wall Street Journal on September 22, 1998. This paper and the details of the design were first presented publicly by Mr. Ray Holt at the Vintage Computer Festival held at the Santa Clara Convention Center on September 26-27, 1998.