File:Tesla Coil at High Voltage Testing Laboratory.JPG
Original file (2,940 × 2,333 pixels, file size: 1.49 MB, MIME type: image/jpeg)
This photo shows the outdoor Ohio Insulator Company's high voltage testing laboratory in Barberton, Ohio. It is shown in Figure 4 of A. O. Austin's June 16, 1925 paper titled "Present use of insulated controls for reducing the number of arcs to ground on transmission lines" presented in Paris, France. This laboratory was located outside Bldg. 3 at the Ohio Insulator manufacturing plant at Park and 9th St. in barberton, Ohio. A. O. Austin conducted most of his high voltage tests at this time using high frequency (10 kilohz to 70 kilohz) voltage generated by Tesla coils as shown in the center of the photo. The top of a transmission tower with a 7 unit suspension insulator string is shown on the right. The function of the two large corrugated silos, one located on the left and one on the right behind the Tesla coil, is uncertain.
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 19:22, 27 May 2014 | 2,940 × 2,333 (1.49 MB) | Mstehney (talk | contribs) | This photo shows the outdoor Ohio Insulator Company's high voltage testing laboratory in Barberton, Ohio. It is shown in Figure 4 of A. O. Austin's June 16, 1925 paper titled "Present use of insulated controls for reducing the number of arcs to ground on |
You cannot overwrite this file.
File usage
The following page uses this file: